|
|
Post by arodpdt117 on Jun 21, 2017 11:39:58 GMT -5
Does anyone know if the new Accuhunter Scope will fit on the older Accutouch models? I have an Accutouch with a 5 Pin Accustat scope and I was going to try out the new accuhunter scope if I could just get the scope without the whole sight but I can' t figure out exactly if they are compatible or not. Might be easier just to get the whole sight anyway so I don't have to redo my yardage tapes everytime I switch out.
|
|
|
|
Post by arodpdt117 on Jun 21, 2017 17:32:13 GMT -5
called and talked to Rusty from Axcel...it is compatible. As a follow up if anyone is getting a rattling/buzzing from their accutouchs/accustats he said they had a problem with the old windage parts and are swapping them out if you send them in.
|
|
|
|
Post by enkriss on Jun 21, 2017 21:33:51 GMT -5
Love mine.... no rattles or buzzing at all.
|
|
|
|
Post by arodpdt117 on Jun 22, 2017 13:52:01 GMT -5
Love mine.... no rattles or buzzing at all. did you get the whole new Accuhunter sight or did you just buy the scope and throw it on an accutouch bar? |
|
|
|
Post by enkriss on Jun 22, 2017 13:54:58 GMT -5
Love mine.... no rattles or buzzing at all. did you get the whole new Accuhunter sight or did you just buy the scope and throw it on an accutouch bar? Bought the whole site. It will fit in any sight. Fits in my fast eddie. |
|
|
|
Post by enkriss on Nov 19, 2017 13:25:50 GMT -5
Love mine.... no rattles or buzzing at all. Okay... I need to rescind my statement. My accuhunter has begun to rattle and it’s pissing me off. |
|
|
|
Post by p on Nov 20, 2017 6:50:28 GMT -5
Love mine.... no rattles or buzzing at all. Okay... I need to rescind my statement. My accuhunter has begun to rattle and it’s pissing me off. Mine too. I had mine in pieces trying to figure it out and finally called and got a new scope from them to try since it didn’t buzz with it off the sight. No help. Sent it to them to fix and they put a new windage unit on it. It helped some but it still rattles some if I Whack the bow with my hand just right. If you take the windage unit off there’s 2 little set screws on the part that slides up and down the head for vertical adjustment. You can try tightening those a little bit. Too much and the vertical will be hard to move. I have a new 3 pin MBG Pure Gold coming and I’ll probably sell the Axcel. It doesn’t buzz at the shot but I can make it vibrate by hand and that’s not right for a sight that expensive. And just so you know, I bought mine cause you liked yours so much. It’s all your fault. 😂 |
|
|
|
Post by enkriss on Nov 20, 2017 7:08:56 GMT -5
Okay... I need to rescind my statement. My accuhunter has begun to rattle and it’s pissing me off. Mine too. I had mine in pieces trying to figure it out and finally called and got a new scope from them to try since it didn’t buzz with it off the sight. No help. Sent it to them to fix and they put a new windage unit on it. It helped some but it still rattles some if I Whack the bow with my hand just right. If you take the windage unit off there’s 2 little set screws on the part that slides up and down the head for vertical adjustment. You can try tightening those a little bit. Too much and the vertical will be hard to move. I have a new 3 pin MBG Pure Gold coming and I’ll probably sell the Axcel. It doesn’t buzz at the shot but I can make it vibrate by hand and that’s not right for a sight that expensive. And just so you know, I bought mine cause you liked yours so much. It’s all your fault. 😂 I did like it before this rattle. I might try a king pin. Every slider I have had did this. |
|
|
|
Post by kasey on Jan 1, 2018 18:23:16 GMT -5
Which extension bar fits the accuhunter plus sight?
|
|
|
|
Post by killermidget on Jan 26, 2018 12:45:36 GMT -5
Which extension bar fits the accuhunter plus sight? Evidently the Fast Eddie from Spott Hogg is interchangeable......The question now is........ is the Fast Eddie bar the same as a Hogg-it bar?  I have a few of those.....but no Fast Eddie bars. |
|
