|
|
Post by killermidget on Sept 23, 2017 18:45:41 GMT -5
Blazer 2" vs Vantec V-Maxx 2.5" vs Vantec V-Maxx 3"
I have loads of Blazers in the 2" model but want to try something different. Please give your opinions on the choices listed above........
|
|
|
|
Post by tsm213 on Sept 23, 2017 19:17:38 GMT -5
 Using these with a 4 fletch and a strait offset. Broadheads fly awesome, they are also super tough. I have nothing too add on your 3 choices haha |
|
|
|
Post by bowman1955 on Sept 24, 2017 10:49:59 GMT -5
^^^^^^^^^^^^^^^^^What he said Stan they are the best I have found!
|
|
|
|
Post by elkguide on Sept 24, 2017 12:12:38 GMT -5
Still using blazers.
|
|
|
|
Post by trial153 on Sept 24, 2017 13:56:55 GMT -5
max stealth for sure ...
|
|
|
|
Post by tsm213 on Sept 24, 2017 14:11:02 GMT -5
You absolutely have to use a primer right before fletching on those. I learned the hard way after that they stick like crazy. The ones in the picture Have been shot these through a rubber backstop several times and there was absolutely no damage to them.
|
|
|
|
Post by fergeris on Oct 17, 2017 7:14:00 GMT -5
I'm looking at the aae 3" I think the max stealth vanes they have always flown great. I'm using the bohnning X vane in a 4 fletch right now
|
|
|
|
Post by killermidget on Oct 17, 2017 21:31:09 GMT -5
I'm looking at the aae 3" I think the max stealth vanes they have always flown great. I'm using the bohnning X vane in a 4 fletch right now I bought some 1 1/2” Blazers to do a 4 fletch with. But I couldn’t convince myself that they would steer broadheads.........so. |
|
|
|
Post by dreamrider on Oct 17, 2017 22:19:44 GMT -5
I'm looking at the aae 3" I think the max stealth vanes they have always flown great. I'm using the bohnning X vane in a 4 fletch right now I bought some 1 1/2” Blazers to do a 4 fletch with. But I couldn’t convince myself that they would steer broadheads.........so. The 4 1 1/2" worked great on my ST,s but still prefer 2" |
|
|
|
Post by fergeris on Oct 18, 2017 10:07:20 GMT -5
I bought some 1 1/2” Blazers to do a 4 fletch with. But I couldn’t convince myself that they would steer broadheads.........so. The 4 1 1/2" worked great on my ST,s but still prefer 2" The x vanes are low profile but a 2" an they seem to work well |
|
